HP Book 6000 manual Smbus Tests

Code	Suggestions
9016h	Reset the computer. Reprogram the BIOS IC.
	Replace the power supply PCA. Replace the
	motherboard.
9017h	See chapter 5 for cosmetic guidelines. If
	warranted, replace the display assembly.
CD-ROM Tests
0A00h	Insert a CD in the drive.
0A01h	Repeat the test. Replace the CD-ROM drive.
0A02h	No repair. (Automatic close not supported.)
0A03h	Insert a different CD in the drive and repeat the
	test. Check the connectors on the CD-ROM
	drive and motherboard. Replace the CD-ROM
	drive. Replace the motherboard.
0A04h	Insert a data CD in the drive and repeat the
	test.
0A05h	Insert a different CD in the drive and repeat the
	test. Check the connectors on the CD-ROM
	drive and motherboard. Replace the CD-ROM
	drive. Replace the motherboard.
0A06h	Insert a data CD in the drive and repeat the
	test. Replace the drive.
0A07h	Repeat the test. Replace the drive.
0A08h	Insert an audio CD and repeat the test.
	Replace the drive.
0A09h	Repeat the test. Replace the drive.
0A10h –	Insert an audio CD and repeat the test.
0A11h	Replace the drive.
0A12h	Insert a different multisession CD and repeat
	the test. Replace the drive.
SMBUS Tests
0E00h –	Replace the motherboard.
0E20h
ATAPI Removable Tests (LS-120)
0F01h	Connect the LS-120 drive and repeat the test.
0F02h –	Insert a different disk in the LS-120 drive and
0F03h	repeat the test. Check the connectors on the
	LS-120 drive and motherboard. Replace the
	LS-120 drive.
0F04h	Replace the LS-120 drive.
0F05h	Repeat the test. Replace the LS-120 drive.
0F06h	Insert a different disk in the LS-120 drive and
	repeat the test. Check the connectors on the
	LS-120 drive and motherboard. Replace the
	LS-120 drive.
0F07h	Replace the LS-120 drive.
0F08h	Insert a different disk in the LS-120 drive and
	repeat the test. Check the connectors on the
	LS-120 drive and motherboard. Replace the
	LS-120 drive.
0F09h	Replace the LS-120 drive.
TI CardBus Tests
1201h	Remove any attached ISA or PCI cards and
	repeat the test.
1202h –	Replace the motherboard.
1203h
1205h –	Insert a different PC Card and repeat the test.
1206h	Replace the PCMCIA socket. Replace the
	motherboard.
1207h	Reset the computer. Replace the motherboard.

Code	Suggestions
USB Tests
1301h	Reprogram the BIOS IC. Replace the power
	supply PCA. Replace the motherboard.
1302h –	Replace the motherboard.
1316h
9006h	(See USB Port Test below.)

DVD Tests

1900h –	Insert a different DVD in the drive and repeat
1902h	the test. Replace the DVD drive.
LAN/Modem Tests (3Com modem ONLY)
8000h	Note: the test checks only the internal
	hardware up to the mini-PCI card, and does not
	check the mini-PCI panel or any external
	cabling.
	Repeat the test with the LAN cable/phone line
	unplugged. Replace the cable/phone line.
	Check the connections. Replace the mini-PCI
	card. Replace the mini-PCI panel. Replace the
	motherboard.

Fan Tests

9001h	If the fan is already running, you will not hear a
	change. Check the fan connection. Replace the
	heatsink. Replace the motherboard.
9002h	Reset the computer. Replace the motherboard.
USB Port Test
9006h	Make sure a USB device is connected to the
	port you are testing. Select the correct speed
	for the device. Try another USB device.
	Replace the motherboard (or dock component,
	if applicable).
IR Tests (FIR enabled, undocked)
9002h	Reset the computer. Replace the motherboard.
9007h –	Reset the computer. Run BIOS Setup and
9008h	restore default settings. Replace the power
	supply PCA.
9009h	Do not run this test in Windows. For the one-
	unit test, replace the motherboard. For the two-
	unit test, make sure the IR ports on the
	reflector and test computers are lined up,
	replace the motherboard.
900Ah	Repeat the test. For the two-unit test, make
	sure the IR ports on the reflector and test
	computers are lined up. Replace the
	motherboard.
900Ch	Repeat the test. Make sure the IR ports on the
	reflector and test computers are lined up.
	Restart the reflector unit. Replace the
	motherboard.
Dock Tests
9071h,	Update BIOS in computer. Replace electronics
9073h	PCA in dock.
9075h –	Replace electronics PCA in dock.
907Ah
907Bh	Replace LED/button assembly in dock.
9082h	Rerun test with known good computer. Replace
	electronics PCA in dock.
9088h	Replace electronics PCA in dock.
Hard Disk Tests
9602h	Failure may occur soon. Back up data and
	replace the hard disk.

HP OmniBook 6000 Troubleshooting and Diagnostics 3-19