BIOS Setup Utility

The BIOS Setup utility provides access to basic configuration settings. It is independent of the operating system.

Running the BIOS Setup Utility

1.Close all applications, then click Start, Shut Down, Reboot. (If necessary, you can press CTRL+ALT+DEL to reboot.)

2.When the HP logo appears, press F2 to enter the BIOS Setup utility.

3.The pointing devices are not active in BIOS Setup, so you will need to use the keyboard to navigate:

Press the LEFT and RIGHT arrow keys to move among menus.

Press the UP and DOWN arrow keys to move among parameters in a menu.

Press F5 or F6 to move through values for the current parameter, or press ENTER to change a setting.

4.After you select the options you want, press F10 or use the Exit menu to exit BIOS Setup.

If the settings cause a conflict between devices during reboot, the system prompts you to run BIOS Setup, and marks the conflicting settings.

Table 3-7. BIOS Setup Menus and Parameters

OmniBook 6000: Introduced with BIOS version 1.00 (Spring 2000).

Main Menu

 

Default

BIOS Revision

Shows the current BIOS version.

Detected

 

 

automatically.

System Time

Sets the time using 24-hour format. Values set take effect

 

 

immediately.

 

System Date

Sets the date using mm/dd/yy (English) or dd/mm/yy format.

 

Floppy Drive

Sets the floppy drive type.

Detected and set

 

 

automatically.

Internal Hard Disk

Sets the hard disk drive type and various parameters.

Detected and set

 

 

automatically.

Quiet Boot

When enabled, hides summary of power-on self-test and

Enabled

 

messages during boot.

 

Video Display Device

Sets whether the built-in display automatically switches to an

Auto

 

external display, if one is detected.

 

Video Expansion

When enabled, the video image covers the entire display in

Disabled

 

lower resolution modes. When disabled, the video image is

 

 

centered in the display.

 

Primary Video Adapter

Sets whether the computer automatically switches to an

Auto

 

external video adapter connected to the docking system, if

 

 

one is detected.

 

System Memory

Shows the system memory size.

640 KB

Extended Memory

Shows the extended memory size.

Detected

 

 

automatically.

CPU Serial Number

For a processor with a serial number, makes that number

Disabled

 

available to software.

 

HP OmniBook 6000

Troubleshooting and Diagnostics 3-27

Page 79
Image 79
HP Book 6000 manual Running the Bios Setup Utility, Bios Setup Menus and Parameters, Main Menu Default