Memory low Only 1 copy made. Press OK to continue.
Description
The product does not have enough memory to complete the collated copy job.
Recommended action
Break the job into smaller jobs that contain fewer pages.
Turn the product off and then on to clear the memory.
Misprint, Press OK
Description
Feed delay misprint.
Recommended action
Verify that paper is loaded in the input tray.
Reload paper.
No dial tone.
Description
The product could not detect a dial tone.
Recommended action
Check for a dial tone on the phone line by touching the Start Fax button.
Unplug the telephone cord from both the product and the wall and replug the cord.
Make sure that you are using the telephone cord that came with the product.
Open the Service menu, and touch the Fax Service button. Touch the Run Fax Test button. This test verifies that the phone cord is connected to the correct port and that the phone line has a signal. The product prints a report with the results.
If the error persists, contact HP. See www.hp.com/go/LJColorMFPM375 or www.hp.com/go/ LJColorMFPM475 or the support flyer that came in the product box.
No fax answer. Canceled send.
Description
Attempts to redial a fax number failed, or the Redial if No Answer option was turned off.
Recommended action
Call the recipient to ensure that the fax machine is on and ready.
Check that you are dialing the correct fax number.
170 Chapter 2 Solve problems | ENWW |