Table 2-8Event-log-only messages (continued)

Event code

Description

Solution

 

 

 

54.0600

Density sensor error

Verify that the cables between the DC controller and the ITB are firmly

 

 

connected.

54.1100

Black density out of range

If the error persists, replace the color misregistration sensor.

 

 

54.1101

Cyan density out of range

 

 

 

If the error persists, replace the ITB.

54.1102

Magenta density out of

 

 

range

If the error persists, replace the DC controller.

 

 

 

54.1103

Yellow density out of range

 

 

 

 

54.1200

Black density measurement

 

 

abnormality

 

 

 

 

54.1201

Cyan density measurement

 

 

abnormality

 

 

 

 

54.1202

Magenta density

 

 

measurement abnormality

 

 

 

 

54.1203

Yellow density measurement

 

 

abnormality

 

 

 

 

54.1400

Color plane registration

1. Turn off the power by using the power switch, and then wait at least

 

sensor error (inline devices

30 seconds.

 

only)

2. Turn on the power and wait for the product to initialize.

 

 

54.1501

Cyan CPR pattern cannot be

If the error persists, verify that the cables between the color misregistration

 

read

 

 

sensor and the DC controller are firmly connected.

54.1502

Magenta CPR pattern cannot

If the error persists, replace the color misregistration sensor.

 

be read

 

 

If the error persists, replace the ITB.

54.1503

Yellow CPR pattern cannot

 

be read

If the error persists, replace the toner cartridge tray.

 

 

54.1599

Black CPR pattern cannot be

If the error persists, replace the DC controller.

 

read

 

 

 

54.2100

Beam detect (BD) error

If the error persists, replace the DC controller.

 

 

If the error persists, replace the product.

 

 

 

54.2500

Top-of-page sensor error

Verify that the DC controller connectors are firmly connected.

 

 

If the error persists, replace the DC controller.

 

 

 

ENWW

Troubleshooting tools 179