Before proceeding, remove the following components:
●Right cover. See Right cover on page 23.
●Rear door. See Rear door (simplex product) on page 33 or Rear door (duplex product) on page 35.
●Rear upper cover. See
●
Remove the
NOTE: The duplex fan (FM2) is a component of the
1.Disconnect one connector (callout 1).
TIP: The PCA can be dislodged when disconnecting the connector. To secure the PCA, carefully push it towards the inside of the product to clear the mounting tabs near the rib assembly (callout 2 shows the PCA correctly positioned under the tabs). Slide the PCA towards the rib assembly to position the edge of the PCA under the mounting tabs.
Figure
1
ENWW | Removal and replacement procedures 45 |