Drum motor (M1) and developer motor (M2)

This procedure can be used to remove the drum motor (M1) or the developer motor (M2). HP does not recommend removing both of the motors at the same time.

1.Remove the right cover. See Right cover on page 23.

2.Disconnect one connector (callout 1) for motor M1 or motor M2.

NOTE: The drum motor (callout 2) is motor M1. The developer motor (callout 3) is motor M2.

Figure 1-95Remove motor M1 and motor M2 (1 of 6)

1

2

3

ENWW

Removal and replacement procedures 69