HP E3S33UT#ABA, E3S36UT#ABA, Pro 6305 C1E21UT#ABA manual

6.Press down on the green release latch next to the hard drive (1). While holding the latch down, slide the drive forward until it stops, then lift the drive up and out of the bay (2).

Figure 7-26Removing the Hard Drive

7.To install a hard drive, you must transfer the silver and blue isolation mounting guide screws from the old hard drive to the new hard drive.

Figure 7-27Installing Hard Drive Guide Screws

116 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis