Speaker
Description | Spare part number |
|
|
Speaker |
|
|
|
The speaker is attached to the front of the chassis under the rotating drive cage.
1.Prepare the computer for disassembly (Preparation for Disassembly on page 92).
2.Remove the access panel (Access Panel on page 93).
3.Remove the front bezel (Front Bezel on page 94).
4.Rotate the drive cage to its upright position.
5.Disconnect the speaker wire from the white system board labeled SPKR (1).
6.Remove the Torx screw that secures the speaker to the chassis (2).
7.Lift the speaker from the inside of the chassis to remove it (3). Figure
To install the speaker, reverse the removal procedures.
128 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
