7.Connect the power and data cables to the drive as indicated in the following illustrations.

a.If you are installing an optical drive, connect the power cable (1) and data cable (2) to the back of the drive.

NOTE: The power cable for the optical drives is a two-headed cable that is routed from the system board to the rear of the optical drive bays.

Figure 6-20Connecting the Optical Drive Cables

b.If your are installing a media card reader, connect the USB cable to the USB system board connector labeled MEDIA.

Figure 6-21Connecting the Media Card Reader USB Cable

Drives 69

Page 77
Image 77
HP Pro 6305 C1E21UT#ABA, E3S36UT#ABA, E3S33UT#ABA manual 21Connecting the Media Card Reader USB Cable Drives