Hood Sensor

Description

Spare part number

 

 

Hood sensor

638816-001

 

 

The hood sensor is attached in a slot in the rear of the chassis.

1.Prepare the computer for disassembly (Preparation for Disassembly on page 92).

2.Remove the access panel (Access Panel on page 93).

3.Unplug the sensor cable from the system board connector labeled HSENSE (1).

4.Slide the hood sensor straight out of the notch in the chassis (2).

NOTE: A flat blade screwdriver can be used to push the hood sensor out of the slot.

Figure 7-40Removing the hood sensor from the chassis fan

To install the hood sensor, reverse the removal procedure.

Hood Sensor 125

Page 133
Image 133
HP E3S33UT#ABA, E3S36UT#ABA, Pro 6305 C1E21UT#ABA manual Hood Sensor, Description Spare part number Hood sensor 638816-001