2.Remove the screw from the rear of the carrier (1) and slide the top cover off the carrier (2). Figure 7-29Removing the Carrier Cover

3.Remove the adhesive strip that secures the thermal sensor to the top of the hard drive (1) and move the thermal sensor away from the carrier (2).

Figure 7-30Removing the Thermal Sensor

118 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis

Page 126
Image 126
HP E3S36UT#ABA, E3S33UT#ABA, Pro 6305 C1E21UT#ABA manual