Power Switch/LED Assembly

Description

Spare part number

 

 

Power switch/LED assembly

646828-001

 

 

1.Prepare the computer for disassembly (Preparation for Disassembly on page 49).

2.Remove the access panel (Computer Access Panel on page 50).

3.Remove the front bezel (Front Bezel on page 51).

4.Remove the front fan (Front Fan Assembly on page 78).

5.Disconnect the cable from the system board connector labeled PB/LED.

6.With the computer on its side, press on the tabs on the bottom of the assembly (1) to disengage the assembly from the chassis, and then rotate the bottom of the assembly upward (2) to remove it from the chassis.

Figure 6-40Removing the power switch/LED

7.Pull the assembly away from the chassis while threading the cable through the hole in front of the chassis.

Power Switch/LED Assembly 81