Chapter 10

6.Remove the new print cartridge from its packaging, being careful to touch only the black plastic. Gently remove the plastic tape using the pink pull tab.

1Copper-colored contacts

2Plastic tape with pink pull tab (must be removed before installing)

3

Ink nozzles under tape

Maintain the HP All-in-One

CAUTION: Do not touch the copper-colored contacts or ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.

7.Slide the new print cartridge at a slight upward angle into the empty slot. Then gently push on the upper part of the print cartridge forward until it snaps into place.

If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black print cartridge, slide it into the right slot.

74 Maintain the HP All-in-One

Page 77
Image 77
HP F4235, F4240, F4280 manual Maintain the HP All-in-One