To clean the area around the ink nozzles

1.Turn on the product and open the print cartridge door.

The print carriage moves to the far right side of the product.

2.Wait until the print carriage is idle and silent, and then unplug the power cord from the back of the product.

3.Lightly press down on the print cartridge to release it, and then pull it towards you out of the slot.

NOTE: Do not remove both print cartridges at the same time. Remove and clean each print cartridge one at a time. Do not leave a print cartridge outside the product for more than 30 minutes.

4.Place the print cartridge on a piece of paper with the ink nozzles facing up.

5.Lightly moisten a clean foam rubber swab with distilled water.

6.Clean the face and edges around the ink nozzle area with the swab, as shown below.

1Nozzle plate (do not clean)

2Face and edges around the ink nozzle area

Maintain the HP All-in-One

CAUTION: Do not clean the nozzle plate.

Work with print cartridges

81

Page 84
Image 84
HP F4240, F4280, F4235 manual To clean the area around the ink nozzles