For more information, see:

Uninstall and reinstall the software

Cause: The installation might not be complete.

Uninstall and reinstall the software

If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the HP All-in-One application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP All-in-One.

To uninstall from a Windows computer

NOTE: Use this method if Uninstall is not available in the Windows Start menu (click Programs or All Programs, HP, Deskjet F4200 All-In-One series, Uninstall).

1.Open the Windows control panel and double-click Add or Remove Programs.

NOTE: The procedure to open the control panel varies by operating system. If you are not sure how to do this, see the Windows Help.

2.Select HP Deskjet All-In-One Driver Software, and then click Change/Remove. Follow the onscreen instructions.

3.Disconnect the product from your computer.

4.Restart your computer.

NOTE: It is important that you disconnect the product before restarting your computer. Do not connect the product to your computer until after you have reinstalled the software.

5.Insert the product CD-ROM into your computer’s CD-ROM drive and then start the Setup program.

6.Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the product.

Troubleshooting

Software installation troubleshooting

93