To load photo paper in the input tray

1.Remove all paper from the input tray.

2.Insert the stack of photo paper into the far-right side of the input tray with the print side or glossy side down and short edge forward. Slide the stack of photo paper toward the product until it stops.

TIP: For more help on loading small-size photo paper, refer to the guides engraved in the base of the input tray for loading photo paper.

3.Slide the paper-width guide inward until it stops at the edge of the paper.

Do not overload the input tray; make sure the stack of paper fits within the input tray and is no higher than the top of the paper-width guide.

For best results, set the paper type before copying or printing.

Related topics

Recommended papers for printing and copying

View the print resolution

Set the copy paper type

Load index cards

You can load index cards into the input tray of the HP All-in-One to print notes, recipes, and other text.

For best results, set the paper type before copying or printing.

NOTE: The HP All-in-One leaves a 1.2 cm (0.5 inch) border on one short edge. Before printing many cards, print one test card to make sure that the border does not crop your text.

Load originals and load paper

Load paper

27

Page 30
Image 30
HP F4240, F4280, F4235 manual Load index cards, To load photo paper in the input tray, Related topics