Chapter 8

Use the copy features

3.Press the Paper Selection button to select either Photo (Large) or Photo (Small) depending on the size of the paper loaded in the input tray.

NOTE: When copying a 10 x 15 cm (4 x 6 inch) original with 216 x 280 mm (8.5

x11 inch) media loaded in the input tray, press Enlarge/Fit to Page to print a borderless and enlarged copy of the original.

4.Press Start Copy Color.

The product makes a borderless copy of your original photo as shown below.

Related topics

Control panel buttons

Copy a two-page black-and-white document

You can use the HP All-in-One to copy a single- or multiple-page document in color or black and white. In this example, the HP All-in-One is used to copy a two-page black- and-white original.

To copy a two-page document from the control panel

1.Make sure you have paper loaded in the input tray.

2.Load your original print side down on the right front corner of the glass.

TIP: For quality copies, ensure that the scanner glass is clean and that there are no foreign materials adhering to it. For more information, see Clean the glass.

3.Press the Paper Selection button to set the paper type.

4.Press Start Copy Black.

5.Wait until the product has finished printing the first page. Remove the first page from the glass and load the second page.

6.Press Start Copy Black.

60 Use the copy features

Page 63
Image 63
HP F4240, F4280, F4235 manual Copy a two-page black-and-white document, Press Start Copy Color, Press Start Copy Black