Set the copy draft setting
Use the control panel to set the product to print copies in draft mode.
NOTE: This setting affects copy quality only. Print quality is not affected.
1.On the product control panel, press the Copy Menu 
button.
2.Use the arrow buttons to select the Draft Mode menu, and then press the OK button.
3.Use the arrow buttons to select the On or Off option.
4.Press the OK button to save the selection.
Check the scanner glass for dirt and smudges
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can affect performance. Use the following procedure to clean the scanner glass and white plastic backing.
1.Use the power switch to turn off the product,
and then unplug the power cord from the electrical socket.
2.Open the scanner lid.
3.Clean the scanner glass and the white plastic
backing with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the product; these can damage the product. Do not place liquids directly on the glass or platen. They might seep and damage the product.
92 Chapter 8 Copy | ENWW |