3.Use the arrow buttons to select the On option, and then press the OK button to save the selection.

NOTE: The factory-set default for automatic copy collation is On.

4.Load the first page of the document on the flatbed scanner.

5.Press the Start Copy button.

6.Remove the printed page from the output bin, and then place that page in Tray 1 with the top edge leading into the product and with the printed side facing down.

7.Remove the first page, and then load the second page onto the flatbed scanner.

8.Press the OK button, and then repeat the process until all of the pages in the original have been copied.

9.When the copy job is completed, press the Start

Copy

button to return the product to Ready

mode.

ENWW

Copy on both sides (duplex) 99