Fax from the document feeder

1.Insert the originals into the document feeder

face-up.

NOTE: The document feeder capacity is up to 35 sheets of 75 g/m2 or 20 lb media.

CAUTION: To prevent damage to the product, do not use an original that contains correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals into the document feeder.

2.Adjust the guides until they are snug against

the paper.

3.Press the Phone Book button.

4.From the list, select the phone book entry. If no entry exists, use the keypad on the control panel to dial the number.

5.On the control panel, press the Start Fax button. The product starts the fax job.

Manual dial faxing

Usually, the product dials after you press the Start Fax button. At times, however, you might want the product to dial each number as you press it. For example, if you are charging your fax call to a calling card, you might need to dial the fax number, wait for the acceptance tone of your telephone company, and then dial the calling card number. When dialing internationally, you might need to dial part of the number and then listen for dial tones before continuing to dial.

134 Chapter 10 Fax

ENWW