Control panel message

Description

Recommended action

 

 

 

 

Fax memory full

During the fax job, the memory filled. All

Print all received faxes or wait until all

Canceling send

pages of the fax have to be in memory for a

pending faxes are sent.

 

fax job to work correctly. Only the pages that

Ask the sender to send the fax again.

 

fit into memory were sent.

 

 

Ask the sender to divide a large fax job into

 

 

smaller sections, and then fax them

 

 

individually.

 

 

 

Make sure that the resolution of the sending

 

 

fax machine is not set to the Photo setting or

 

 

the Superfine setting.

 

 

 

Cancel all fax jobs or clear the faxes from

 

 

memory.

 

 

 

 

Fax recv. error

An error occurred while trying to receive a fax.

Ask the sender to resend the fax.

 

 

Try faxing back to the sender or another fax

 

 

machine.

 

 

 

Check for a dial tone on the phone line by

 

 

touching the Start Fax

button.

Check that the telephone cord is securely connected by unplugging and replugging the cord.

Make sure that you are using the telephone cord that came with the product.

Make sure that the phone is working by disconnecting the product, plugging in a telephone to the phone line, and making a voice call.

Decrease the fax speed. Ask the sender to resend the fax.

Turn off error-correction mode. Ask the sender to resend the fax.

NOTE: Turning off error-correction mode can reduce the quality of the fax image.

Connect the product to a different phone line.

If the error persists, contact HP. See www.hp.com/support/ljm1530series or the support flyer that came in the product box.

146 Chapter 10 Fax

ENWW