Set up fax with an extension phone

With this setting turned on, you can alert the product to pick up the incoming fax call by pressing 1-2-3 sequentially on the telephone keypad. The default setting is On. Turn this setting off only if you use pulse dialing or if you have a service from your telephone company that also uses the 1-2-3 sequence. The telephone company service does not work if it conflicts with the product.

1.On the control panel, press the Setup button.

2.Use the arrow buttons to select the Fax Setup menu, and then press the OK button.

3.Use the arrow buttons to select the Advanced Setup menu, and then press the OK button.

4.Use the arrow buttons to select the Extension Phone menu, and then press the OK button.

5.Use the arrow buttons to select the On or Off option, and then press the OK button to save the selection.

Setup for stand-alone fax

1.Unpack and set up the product.

2.At the control panel, press the Setup button.

3.Use the arrow buttons to select the System Setup menu, and then press the OK button.

4.Use the arrow buttons to select the Time/Date menu, and then press the OK button.

5.Use the arrow buttons to select the 12-hour clock or 24-hour clock, and then press the OK button.

6.Use the keypad to enter the current time.

7.Complete one of the following:

●For the 12-hour clock, use the arrow buttons to move past the fourth character. Select 1 for a.m. or 2 for p.m. Press the OK button.

●For the 24-hour clock, press the OK button.

8.Use the keypad to enter the current date. Use two digits to specify the month, day, and year. Press the OK button.

9.Use the arrow buttons to select the Fax Setup menu, and then press the OK button.

10.Use the arrow buttons to select the Basic Setup menu, and then press the OK button.

11.Use the arrow buttons to select the Fax Header menu, and then press the OK button.

12.Use the keypad to enter your fax number and your company name or header, and then press the OK button.

NOTE: The maximum number of characters for the fax number is 20; use up to 25 characters for the company name.

13.Set other settings as necessary to configure for the product environment.

Configure fax settings

The product fax settings can be set from the control panel or from HP ToolboxFX.

ENWW

Set up fax 113