4.Release one tab (callout 3), and then remove the paper-pickup-gear assembly (callout 4).

CAUTION: Be careful when you remove this assembly. The outer gear and spring can easily become separated from the inner gear. If the gears become separated, make sure that you do not lose the spring. See Reinstall the paper-pickup-gear assembly on page 135.

Figure 6-55Remove the paper-pickup-gear assembly (3 of 3)

34

Reinstall the paper-pickup-gear assembly

Use the following procedure to reassemble the outer gear, inner gear, and spring if they become separated.

1.Make sure the spring (callout 1) is positioned on the pedestal portion of the outer gear.

NOTE: When the outer and inner gears are assembled, the spring rests inside a cavity (callout 2) in the inner gear.

Figure 6-56Reinstall the paper-pickup-gear assembly (1 of 3)

1

ENWW

Internal assemblies 135

Page 147
Image 147
HP P2050 manual Reinstall the paper-pickup-gear assembly, 55Remove the paper-pickup-gear assembly 3