HP P2050 manual Service menu

Service menu

Use this menu to restore default settings, clean the product, and activate special modes that affect print output.

Menu item	Description
Cleaning mode	Use this option to clean the product if you see toner specks or other marks on the
	printed output. The cleaning process removes dust and excess toner from the paper
	path.
	When you select this item, the product prompts you to load plain paper in Tray 1 and
	then press OK to begin the cleaning process. Wait until the process is complete.
	Discard the page that prints.
USB speed	Sets the USB speed to High or Full. For the product to actually operate at high
	speed, it must have high speed enabled and be connected to an EHCI host controller
	that is also operating at high speed. This menu item also does not reflect the current
	operating speed of the product.
	The default setting is High.
Less paper curl	If printed pages are consistently curled, use this option to set the product to a mode
	that reduces curl.
	The default setting is Off.
Archive print	If you are printing pages to be stored for a long time, use this option to set the product
	to a mode that reduces toner smearing and dusting.
	The default setting is Off.
Restore defaults	Sets all customized settings to the factory default values.

ENWW Control panel (HP LaserJet P2050 Series Printers only) 27