5.Remove three screws (callout 4) near the guide removed in the previous step.

NOTE: The front-most screw is different than the other two screws. Make sure this screw is replaced in the mounting hole it is removed from when you reinstall the assembly.

Figure 6-82Remove the registration assembly (4 of 7)

4

6.Remove two screws (callout 5) at the other end of the assembly. Figure 6-83Remove the registration assembly (5 of 7)

5

154 Chapter 6 Removal and replacement

ENWW

Page 166
Image 166
HP P2050 manual Enww