HP P2050 manual 1Sequence of operation, Name Timing Purpose

Timing

Sequence of operation

The microprocessor on the DC controller controls the product operation sequences.

Table 5-1Sequence of operation

Name	Timing	Purpose
WAIT	From power-on or the door is closed until the end of	Detects presence of a print cartridge.
	the main motor initial drive.
STBY (standby)	From the end of the WAIT or LSTR period until either	Prepares the product to receive print commands
	a print command is sent from the formatter or the
	power is turned off.
INTR (initial	From the time the print command is received from the	Starts each high-voltage biases, the laser scanner,
rotation)	formatter until the fuser reached its targeted	and fuser in preparation for printing.
	temperature.
PRINT	From the end of the INTR period until the last media	Forms the image on the photosensitive drum and
	completes the fusing operation.	transfers the toner image to the media.
LSTR (last	From the end of the PRINT period (when high-voltage	Delivers the last page of a print job.
rotation)	is turned off) until the main motor stops rotating.	After LSTR, the product either returns to STBY or, if
		another print command was sent from the formatter,
		enters INTR.

ENWW Timing 83