Inlet-cable assembly

1.Remove the following components:

Right cover. See Right cover on page 115.

Left cover. See Left cover on page 118.

Rear cover, rear door, and duplex-paper-feed assembly. See Rear cover, rear door, and duplex-paper-feed assembly on page 120.

NOTE: Only the HP LaserJet P2050 Series products have a duplex-paper-feed assembly installed.

Reverse-sensor assembly. See Reverse-sensor assembly; HP LaserJet P2050 Series on page 142.

NOTE: Only the HP LaserJet P2050 Series products have a reverse-sensor assembly installed.

2.Remove one screw (callout 1), and then slide the media-feed guide toward the formatter side of the product to remove it.

Figure 6-76Remove the inlet-cable assembly (1 of 3)

1

150 Chapter 6 Removal and replacement

ENWW

Page 162
Image 162
HP P2050 manual Inlet-cable assembly, 76Remove the inlet-cable assembly 1 Removal and replacement