HP P2050 manual System setup menu, Menu item Sub-menu item Description

System setup menu

Use this menu to establish basic product settings. The System setup menu has several sub-menus.

Menu item	Sub-menu item	Sub-menu item	Description
Language			Select the language for the control-panel
			display messages and the product reports.
Quiet mode		On	Enable or disable quiet mode. When quiet
		Off	mode is turned on, the product prints at a
			slower speed. This setting is used for heavy
			media.
			The default setting is Off.
Paper setup	Def. paper size	A list of available sizes	Select the size for printing internal reports or
		appears.	any print job that does not specify a size.
	Def. paper type	A list of available media types	Select the media type for printing internal
		appears.	reports or any print job that does not specify
			a type.
	Tray n	Paper type	Select the default size and type for the tray
	NOTE: n = 1, 2, or 3	Paper size	from the list of available sizes and types.
	Paper out action	Wait forever	Select how the product should react when a
		Override	print job requires a size or type that is not
			available or when a specified tray is empty.
		Cancel	Select Wait forever to make the product wait
			until you load the correct media and press
			OK. This is the default setting.
			Select Override to print on a different size or
			type after a specified delay.
			Select Cancel to automatically cancel the
			print job after a specified delay.
			If you select either Override or Cancel, the
			control panel prompts you to specify the
			number of seconds to delay. Press the up
			arrow to increase the time, up to
			3600 seconds. Press the down arrow to
			decrease the time.
Print quality	Cartridge low	(1-20)	The percentage threshold determines when
			the product begins reporting low toner.
Print density	(1–5)		Select the amount of toner to apply to thicken
			edges and lines.
			The default setting is 3.

ENWW Control panel (HP LaserJet P2050 Series Printers only) 25