HP P2050 manual 41.X.Error, Turn off then on

Control-panel message	Event code	Description	Recommended action
Press [OK]		match the configuration for the	size that you have loaded. See
		tray.	Load trays on page 38.
41.X.Error		A temporary printing error has	1. Make sure that the paper
		occurred.		meets specifications. See
				Supported paper and print
				media on page 32. If pages
				stick together, the paper
				sensors might detect a
				sheet of paper longer than
				expected.
			2.	Verify that the paper size
				settings in the control panel,
				printer driver, and software
				program match.
			3.	Verify that the correct paper
				size is loaded in the product.
49 Error		The product experienced an	Turn the product off, wait at least
Turn off then on		internal error.	30 seconds, and then turn the
			product on and wait for it to
			initialize.

If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.

50.X Fuser error	50.0000
Turn off then on	50.1000
	50.3000
	50.4000

50.7000

50.8000

50.9000

The product has experienced an error with the fuser.

1.Turn the product power off and then on.

2.If you have replaced the fuser, make sure that the correct voltage version is installed (110 V or 220 V).

3.Make sure that the following connectors are seated:

◦J102 on the engine controller PCA (AC voltage)

◦ J210 on the engine controller PCA (TH1)

4. Replace the fuser. See Fuser on page 158.

220 Chapter 7 Solve problems ENWW