HP Virtual Connect Firmware Item, Action, Description, Description, Traffic Classes, The following table lists the available actions from this screen:

Traffic Classes

A traffic class allows you to categorize packets requiring similar traffic management.

The following table describes the columns on the traffic class screen. Clicking another link in the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.

Item	Description
Name	Name of the traffic class.
Real Time	One user-defined class can be designated as real time. Traffic from this class has the
	highest priority and is scheduled in strict priority order. The Share and Max Share for
	the Real Time class must be equal, and should be less than or equal to 50.
Share	Minimum guaranteed bandwidth that each traffic class gets. The sum of shares of all
	enabled classes and the Best_Effort class equals 100.
Max Share	Maximum share that the traffic class can use when other traffic classes are not using
	their maximum share. The FCoE-Lossless class gets its maximum share from fabric
	speed settings.
Egress DOT1P Priority	The egress dot1p priority marking applied on the VLAN tag.
Enabled	The FCoE Lossless and Best_Effort classes are enabled by default. Other classes are
	enabled if the checkbox in the Enabled column is selected.
Reset QoS	Click Reset, and then click Apply.
configuration to default	IMPORTANT: Clicking Reset, and then clicking Apply resets the values on both the
values	Traffic Class and Ingress Traffic Classification tabs to the default values for active and
	inactive configurations.

The following table lists the available actions from this screen:

Action	Description
Edit the name of a traffic class	Click on the name of the traffic class, edit the name, and then
	click Apply.
Designate a traffic class as real time	Select the checkbox in the Real Time column of the class. If a
	class is already designated as Real Time, unselect that
	checkbox, and then select the checkbox in the Real Time column
	of the new class. If necessary, adjust the numbers in the Share
	and Max Share columns. These numbers must be equal, and
	cannot be more than 50.
	Virtual Connect networks 106