Although you can select individual FlexNICs as monitored ports, VCM mirrors traffic on a physical port basis. To filter the list of ports, select one or more of the boxes at the top of the screen.

The following table describes the available actions in the Select Monitored Ports screen.

Task

Action

 

 

Select a port to be monitored

Select the check box corresponding to the port. When 16 ports have been

 

selected, no additional check boxes are displayed. You must clear a

 

check box to select a different port.

 

 

Remove a port from the

Clear the check box corresponding to the port.

monitored list

 

Filter by Interconnect Module

 

Filter the list by interconnect

Select All Module Ports or a single port from the Filter by Interconnect

module server port

Module ports list.

Filter the list by I/O bay

Select All Module Bays or a single I/O bay from the Filter by Interconnect

 

Module Module bay list. Only I/O bays with VC-Enet interconnect devices

 

are displayed.

 

 

Filter the list by enclosure

Select All Enclosures or a single enclosure from the Filter by Interconnect

 

Module enclosure list.

Filter by Profile

 

Filter the list by a specific profile

Select All Profiles or a single profile from the Filter by Profile profiles list.

 

The assigned networks are listed by each subport. If multiple networks are

 

assigned, mouse over the label to see a listing of all networks associated

 

with the subport.

 

 

Filter by Physical Server

 

Filter the list by server bay

Select All Bays or a single bay from the Filter by Physical Server bay list.

 

The list displays the actual server type installed in the bay, for example,

 

"Server Bay 1 HP ProLiant BL420c Gen8." If more than one enclosure is

 

imported into the domain, options are grouped according to the enclosure

 

name.

 

 

Filter the list by server port

Select All Ports or a single port from the Filter by Physical Server port list.

Virtual Connect networks 96