HP Virtual Connect Firmware RADIUS Settings (RADIUS Server) screen, Field, Column, Description, Description, This screen is disabled if the domain is in FIPS mode

Column	Description
Valid From	The date and time when this certificate became valid
Valid To	The date and time when this certificate becomes invalid
Delete	Click X in the line of the certificate to delete.

RADIUS Settings (RADIUS Server) screen

This screen enables domain administrators to configure a RADIUS server to authenticate users accessing the CLI or GUI based on user name and password and to provide role-based authorization. Users and client system access must be configured on the RADIUS server side prior to enabling this feature in VCM. Configuration changes made on this screen do not update the RADIUS server.

This screen is disabled if the domain is in FIPS mode.

Users with domain user role permissions can test a RADIUS configuration before applying it. For more information, see "Test RADIUS authentication (on page 77)."

The following table describes the fields within the RADIUS Settings (RADIUS Server) screen. Clicking another link in the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.

Field	Description
Enable RADIUS	Select to enable RADIUS authentication.
Authentication
Server Address	The IPv4 or IPv6 address, or the DNS host name of the RADIUS server used for
	authentication
Server SSL Port	The server UDP port number. Valid values include a valid port number between 1
	and 65535. The default port is 1812.
Server Timeout	The time in seconds that VCM should wait before timing out the request. If the
	primary server times out and a secondary server is configured, VCM attempts the
	request on the secondary server. If the secondary server times out, the request
	fails. The valid range of values is from 1 to 600 seconds. The default timeout is 10
	seconds.

Virtual Connect users and roles 75