HP Virtual Connect Firmware Adding and importing a remote enclosure, Task, Column, Action, Description, To add a remote enclosure:, o Onboard Administrator IP Address

Column	Description
Rack Name	Name of the rack (assigned through the Onboard Administrator)
OA IPv4 Address	IPv4 IP address of the OA. "Local Enclosure" indicates this enclosure is managed by the
	local Onboard Administrator.
OA IPv6 Address	IPv6 IP address of the OA. "Local Enclosure" indicates this enclosure is managed by
	the local Onboard Administrator.
Status	Displays whether the enclosure has been imported
Action	Perform import and delete operations.

The following table describes the available actions in the Domain Settings (Enclosures) screen. Clicking another link in the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.

Task	Action
Import an enclosure	Click the Import link in the Action column, or left-click on the enclosure
	row, right-click to display a menu, and then select Import.
Add and import a remote	Click Find below the table, or right-click inside the table, and then select
enclosure ("Adding and	Find.
importing a remote enclosure" on
page 26)
Remove a remote enclosure	Click the Delete link in the Action column, or left-click on the enclosure
("Removing a remote enclosure"	row, right-click to display a menu, and then select Delete.
on page 27)

Adding and importing a remote enclosure

Adding and importing a remote enclosure requires domain and server role permissions. Virtual Connect Manager supports up to four c7000 enclosures in a single domain.

To add a remote enclosure:1.Click Find on the Domain Settings (Enclosures) screen (on page 25).2.Type in the following information:o Onboard Administrator IP Address

Virtual Connect domains 26