HP Virtual Connect Firmware Interconnect Bay OA Communication Status icon definitions

Icon	Operational state	Meaning
(blue)	Initializing	Device is initializing.
	Unavailable	Device is active but unable to
(blue)		provide service.
	Degraded	Device is partially operational, but
(yellow)		capacity is lost.
(orange)	Misconfigured	Device has a configuration error.
	Incompatible	Device does not match the
(orange)		configuration.
	No communication	Cannot communicate with the
(orange)		device.
	Missing	Device is configured but not
		accessible.
	Failed	Device is not operational because
		of an error.

Corrective action

Wait until initialization is complete. (This icon should only be seen at startup.)

Attempt to re-establish connection.

Check and correct the Onboard Administrator error condition.

Correct the Virtual Connect Manager configuration attributes.

Remove the incorrect hardware. Insert the correct module.

Check the physical connections and IP address.

Insert the correct hardware module.

Reset the device or application, or replace the device.

Interconnect Bay OA Communication Status icon definitions

Icon Operational state Meaning Corrective action

OK	Device is fully operational.
Failed	Cannot communicate with the
	device.

None

Do one or more of the following:

•Reset the interconnect module.

•Check if the physical device is properly seated in the bay.

•Check the IP address.

Virtual Connect modules 263