The following table describes the available actions in the Domain Settings (IP Address) screen. Clicking another link in the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.

Task

Action

 

 

Use a Virtual Connect Domain IPv4 or

For IPv4, select the box next to Use Virtual Connect Domain IPv4

IPv6 Address setting

Address, and then enter the IPv4 Address, Subnet Mask, and

 

Gateway.

 

For IPv6, select the box next to Use Virtual Connect Domain IPv6

 

Address, and then enter the IPv6 Address and Gateway.

 

 

Save changes

Click Apply.

Cancel without saving changes

Click Cancel.

For more information on IPv6, see "Appendix C: Using IPv6 with Virtual Connect (on page 306)."

Domain Settings (Enclosures) screen

Use this screen to view, add, or remove enclosures in the domain. When importing an enclosure, consider the following:

After an enclosure import, the VCM CLI shows the Stacking Links Connections Status as "Failed" until all modules are initialized. Depending on the actual configuration, this can take up to 30 seconds.

If an enclosure import is attempted with a server blade in a failed state, VCM might incorrectly report an error when an error does not exist. If the import times out with an error, close the browser and log in again to verify that the import was successful. Use the OA to verify the working state of all server blades.

For more information on adding and importing a remote enclosure, see "Adding and importing a remote enclosure (on page 26)."

Multiple enclosures are supported only if an appropriate primary and backup VC module is running in the local enclosure. For more information about connecting multiple enclosures, see the HP Virtual Connect for c-Class BladeSystem Setup and Installation Guide on the HP website (http://www.hp.com/go/vc/manuals).

The following table describes the columns within the Domain Settings (Enclosures) screen.

Column

Description

 

 

Enclosure ID

Assigned ID of the enclosure

 

 

Enclosure Name

Name of the enclosure

Enclosure Serial

Serial number of the enclosure

Number

 

Virtual Connect domains 25