HP Virtual Connect Firmware VC Domain MIB traps, Trap name, Trap data, Description, Description, Managed status, VC Domain Managed Status Changed traps

Trap name	Trap data	Description
vcModPortBpduLoopCleared	port identification	A network loop condition is cleared on this port. The trap
	loop status	data indicates the physical port associated with a Flex10
		port.
		For Flex10 ports, this trap is sent only after all Flex10
		ports on a physical port are cleared from a loop
		condition.
vcModPortProtectionConditio	Port index to the	A port protection condition is detected on this port. If the
nDetected	ifTable (ifIndex)	new port protection status is a value other than OK, the
	Port index to the	port may be disabled to protect the VC module from
	vcModulePortTable	further service degradation. Administrative action is
	Port protection status	required to recover the port from this condition.
vcModPortProtectionConditio	Port index to the	The port is recovered from port protection condition to
nCleared	ifTable (ifIndex)	normal operational state.
	Port index to the
	vcModulePortTable
	Port protection status
vcSwitchMemParityErrorEvent	Error counter	The switch hardware has detected a parity error. The
	vcSwitchMemParityEr	parity error is automatically corrected.
	rorCount

VC Domain MIB traps

The Virtual Connect vc-domain-mib.mib MIB provides visibility into the various components of a Virtual Connect Domain.

VC Domain Managed Status Changed traps

This section describes the *ManagedStatus, *Cause, *RootCause, and *ReasonCode OIDs found in each *ManagedStatusChanged traps in the VC Domain MIB.

The ManagedStatus enumerations (vcDomainManagedStatus, vcEnclosureManagedStatus, and so on) for all managed status changed objects (vcDomainManagedStatusChanged, cEnclosureManagedStatusChanged, and so on) are described in the following table.

Managed status	Description
unknown	Indicates the condition of the component could not be determined
normal	Indicates the component is fully functional
warning	Indicates a component threshold has been reached or error condition is imminent
minor	Indicates an error condition exists that has little or no component impact
major	Indicates an error condition exists that significantly impairs the component
critical	Indicates an error condition exists where the component no longer provides service
disabled	Indicates the component is disabled and non-functioning
info	Indicates a non-service affecting condition exists such as initializing components and
	system login/logout

•The Cause string indicates why an object transitioned to the current managed state from the specific objects perspective. A network failure is an example Cause string.

•The RootCause string indicates the root causes for an object transitioning managed states. The RootCause for a network failure could indicate all uplink ports of the network have failed.

Virtual Connect domains 44