HP Virtual Connect Firmware Description, Description, Description, Port Statistic, Remote Device Information, Pluggable Module Information

Port Statistic	Description
IfHCOutMulticastPkts	The total number of packets that higher-level protocols requested be
	transmitted, and which were addressed to a multicast address at this
	sublayer, including those that were discarded or not sent. For a MAC
	layer protocol, this includes both Group and Functional addresses. This
	object is a 64-bit version of ifOutMulticastPkts.
IfHCOutBroadcastPckts	The total number of packets that higher-level protocols requested be
	transmitted, and which were addressed to a broadcast address at this
	sublayer, including those that were discarded or not sent. This object is a
	64-bit version of ifOutBroadcastPkts.
cosq<N>_ucast_DroppedPkts	The accumulated dropped packet count of unicast packet of the queue for
	the specified port. For VC FlexFabric 10Gb/24-port module and VC
	Flex-10 Enet module, the counter includes unicast and multicast data.
cosq<N>_ucast_OutBytes	The accumulated transmitted byte count of unicast packets of the queue for
	the specified port. For VC FlexFabric 10Gb/24-port module and VC
	Flex-10 Enet module, the counter is not supported and the value is 0.
cosq<N>_ucast_OutPkts	The accumulated transmitted packet count of unicast packets of the queue
	for the specified port. For VC FlexFabric 10Gb/24-port module and VC
	Flex-10 Enet module, the counter includes both unicast and multicast data.

*These statistics appear for physical uplink ports, physical downlink ports, and Flex-10 subports. All other statistics only appear for physical uplink and downlink ports.

Remote Device Information*	Description
remote_type	Type of remote device. Virtual Connect uses this information to configure
	the link as an uplink, a stacking link, or to disable. This information is
	based on the LLDP data sent by the device to which the port is attached.
remote_discovered_time	Time the remote device was identified, represented in seconds. This
	information is based on the LLDP data sent by the device to which the port
	is attached.
remote_chassis_id_type	Chassis ID subtype of the remote device
remote_chassis_id	Chassis ID value of the remote device
remote_port_id_type	Port ID subtype of the remote device
remote_port_id	Port ID value of the remote device
remote_port_desc	Port description of the remote device
remote_system_name	System name of the remote device. If the remote device is a VC-Enet
	module, remote_system_name is the remote device's VC domain name.
remote_system_desc	Description of the remote system. If the remote device is a VC-Enet module,
	remote_system_desc is the module's hardware description and firmware
	revision.
remote_system_capabilities	System capabilities of the remote system, for example, repeater, bridge,
	or router
remote_mgmt_addr_type	Management address subtype of the remote device, for example, IPv4,
	IPv6, or DNS
remote_mgmt_addr	Management address of the remote device

*This information is only available for physical uplink and downlink ports. It is not available for Flex-10 subports.

Pluggable Module Information*	Description
identifier	Identifies the type of serial transceiver. The binary values are defined in
	SFF-8472 in the Identifier [Address A0h, Byte 0] field. This field displays
	an ASCII representation of those binary values.
	Virtual Connect modules 256