HP Virtual Connect Firmware manual 226

4	Start with modules in Bays 3	Port	Connected to	—	—	Add connection is disallowed
	and 4, create a profile (add	1	Bay 3	Bay 3	Bay 4	because the current FC module
	2 connections), install	2	Bay 4	Bay 5	Bay 6	configurations do not match
	modules into Bays 5 and 6,	3	Bay 3	—	—	the existing connections in the
	then edit the profile.	4	Bay 4			profile.
						This profile is not useful after
						the hot-plug install. To resolve
						this issue, delete connections 3
						and 4, save the profile, and
						then scenario 3 applies.
5	Start with modules in Bays	Port	Connected to	—	—	Port	Connected to
	3–6, create a profile, install	1	Bay 3	Bay 3	Bay 4	1	Bay 3
	modules into Bays 7 and 8,	2	Bay 4	Bay 5	Bay 6	2	Bay 4
	then edit the profile and add	3	Bay 5	Bay 7	Bay 8	3	Bay 5
	connections.	4	Bay 6			4	Bay 6
						5	Bay 7
						6	Bay 8
						Add connection, 2 times
6	Start with modules in Bays	Port	Connected to	—	—	Add connection is disallowed
	3–6, create a profile (add 4	1	Bay 3	Bay 3	Bay 4	because the current FC module
	connections), install modules	2	Bay 4	Bay 5	Bay 6	configurations do not match
	into Bays 7 and 8, then edit	3	Bay 5	Bay 7	Bay 8	the existing connections in the
	the profile.	4	Bay 6			profile.
		5	Bay 3			This profile is not useful after
		6	Bay 4			the hot-plug install. To resolve
		7	Bay 5			this issue, delete connections
		8	Bay 6			5–8, save the profile, and then
						scenario 5 applies.
7	Start with modules in Bays 5	Port	Connected to	—	—	Add connection is disallowed
	and 6, create a profile,	1	Bay 5	Bay 3	Bay 4	because the current FC module
	install modules into Bays 3	2	Bay 6	Bay 5	Bay 6	configurations do not match
	and 4, then edit the profile.			—	—	the existing connections in the
						profile.
						To make this profile useful,
						remove the two connections,
						save the profile, and then
						begin adding connections.
8	Start with modules in Bays	Port	Connected to	—	—	Add connection is disallowed
	5–8, create a profile, install	1	Bay 5	Bay 3	Bay 4	because the current FC module
	modules into Bays 3 and 4,	2	Bay 6	Bay 5	Bay 6	configurations do not match
	then edit the profile.	4	Bay 7	Bay 7	Bay 8	the existing connections in the
		5	Bay 8			profile.
						To make this profile useful,
						remove the two connections,
						save the profile, and then
						begin adding connections.

Virtual Connect server profiles 226