•The Onboard Administrator firmware must be version 3.11 or higher. HP recommends using the latest version available.

•All Onboard Administrators must use the same user credentials. VCSU uses the primary credentials for the remote enclosure.

•When both Primary and Standby modules in the base enclosure are taken down for maintenance or lose power and are no longer present in the domain, the management capabilities in the VC domain are lost. Both the Primary and Standby modules in the base enclosure must be recovered to regain management access to the VC domain.

If network and fabric uplinks are defined on the remaining enclosures, the servers continue to have network and storage access.

For more information, see the HP Virtual Connect for c-Class BladeSystem Setup and Installation Guide in the Virtual Connect Information Library (http://www.hp.com/go/vc/manuals).

Enclosures View screen

This graphical representation consists of an enclosure front view and rear view. To display a window with information about a particular device, mouse over that device in this graphical view.

The Enclosures view provides status on each device in the enclosure. Select an individual device for more information on that device. The Enclosures view also shows which bays the primary and backup modules are installed in.

To display the Enclosures View screen, click Hardware Overview in the left navigation tree.

HP BladeSystem c-Class enclosures 63