Task

Action

 

 

Change or disable the port speed

Click the pull-down arrow in the Port Speed box.

View Fibre Channel Boot

Select the Fibre Channel Boot Parameters checkbox.

Parameters

 

Enable Fibre Channel Boot on a

Select the Fibre Channel Boot Parameters checkbox. Click the pull-down

port

arrow in the SAN Boot box, and then select the boot order. Enter a valid Boot

 

Target name and LUN in the edit boxes.

Disable Fibre Channel Boot on a

Select the Fibre Channel Boot Parameters checkbox. Click the pull-down

port

arrow in the SAN Boot box, and then select Disabled.

Revert to BIOS settings for Fibre

Select the Fibre Channel Boot Parameters checkbox. Click the pull-down

Channel Boot

arrow in the SAN Boot box, and then select Use BIOS.

Change the profile bay

Select a new bay from the server pull-down menu at the bottom of the screen,

assignment

or select Unassigned.

Change the FCoE connection

Click the pull-down arrow in the FC SAN/FCoE Network Name box.

Change the FCoE port speed

Click the pull-down arrow in the Port Speed name box.

Clear unsaved changes on the

Click Clear.

screen

 

Save changes

Click Apply to save changes and remain on the edit screen, or Apply & Close

 

to save changes and return to the Server Profiles screen.

Cancel without saving changes

Click Cancel.

Assigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade

To create a server profile with FCoE connections, and then assign it to an HP ProLiant BL680c G7 Server Blade:

1.Be sure that the HP ProLiant BL680c G7 Server Blade is installed correctly and powered down:

a. Click Overview under Hardware in the left navigation tree to display the Enclosures View screen.

Virtual Connect server profiles 213