HP Virtual Connect Firmware Adding or editing a credential

The following table describes the available actions in the Domain Settings (Storage Management Credentials) screen. Clicking another link in the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.

Task	Action
Add a credential ("Adding or	Click Add below the table, or right-click inside the table, and then select
editing a credential" on page 30)	Add.
Edit a credential ("Adding or	Click the Edit link in the Action column, or left-click on the credential row,
editing a credential" on page 30)	right-click to display a menu, and then select Edit.
Delete a credential	Click the Delete link in the Action column, or left-click on the credential
	row, right-click to display a menu, and then select Delete.

Adding or editing a credential

Use this screen to add a storage management credential.

To add a credential:

1.Enter a name for the iSCSI storage management in the Name field.

2.Enter the IPv4 address for the iSCSI storage management in the IP address field.

3.Enter an administrator user name for the storage management in the Username field.

4.Enter the administrator password in the Password field.

5.Re-enter the administrator password in the Confirm Password field.

Virtual Connect domains 30