Task | Action | |
|
| |
Select to use server factory | Select the Advanced Profile Settings check box, and then select the Use Server | |
defaults for Ethernet MAC | Factory Defaults for Ethernet MAC addresses check box. | |
addresses |
|
|
Select to use server factory | Select the Advanced Profile Settings check box, and then select the Use Server | |
defaults for Fibre Channel | Factory Defaults for Fibre Channel WWNs check box. | |
WWNs |
|
|
Select to use factory defaults for | Select the Advanced Profile Settings check box, and then select the Use Server | |
serial numbers | Factory Defaults for Serial Numbers check box. | |
Assign a Network Name | 1 | Click Unassigned in the Network Name field, and then click the |
|
| arrow. |
| 2 | Click Select a network.. or Multiple Networks to find and select a network |
|
| for this connection. |
| See "Multiple network connections for a server port (on page 199)." | |
|
|
|
Change the port speed setting | 1 | Click the |
| 2 | Select Preferred, Auto, Custom, or Disabled. If Custom is selected, set the |
|
| port speed, and then click OK. |
|
|
|
Enable or disable PXE, or Use | 1 | Click the |
BIOS | 2 | Select Enabled or Disabled. If the existing PXE configuration on the server |
|
| is correct, the 'Use BIOS' PXE setting should be chosen. This setting is the |
|
| default. |
|
| |
Select to use a multicast filter or | Click the | |
filter set | multicast filter or filter set. | |
Delete an Ethernet connection | Click the Delete link in the Action column, or click the connection to select it, | |
| ||
| cannot be deleted. | |
|
| |
Add an Ethernet connection | Click Add at the bottom of the Ethernet Adapter Connections table, or | |
| ||
|
| |
Delete an iSCSI connection | Click the Delete link in the Action column, or click the connection to select it, | |
| ||
Add an iSCSI connection | Click Add at the bottom of the iSCSI HBA Connections table, or | |
| the table, and then select Add. | |
Delete an FC SAN connection | Click the Delete link in the Action column, or click the connection to select it, | |
| ||
|
| |
Add an FC SAN connection | Click Add at the bottom of the FC HBA Connections table, or | |
| table, and then select Add. | |
|
| |
Delete an FCoE connection | Click the Delete link in the Action column, or click the connection to select it, | |
| ||
Add an FCoE connection | Click Add at the bottom of the FCoE HBA Connections table, or | |
| the table, and then select Add. | |
Change the SAN fabric | Click the | |
connection |
|
|
Change or disable the port speed | Click the | |
View Fibre Channel Boot | Select the Fibre Channel Boot Parameters check box. | |
Parameters |
|
|
Enable Fibre Channel Boot on a | 1 | Select the Fibre Channel Boot Parameters check box. |
port | 2 | Click the |
| 3 | Select the boot order. |
| 4 | Enter a valid Boot Target name and LUN in the edit boxes. |
|
|
|
Disable Fibre Channel Boot on a | 1 | Select the Fibre Channel Boot Parameters check box. |
Virtual Connect server profiles 187