HP Virtual Connect Firmware manual 212

Task	Action
Configure the boot mode	Click the Boot Mode pull-down arrow, and then select the preferred server
	boot mode:
	•	Auto
	•	UEFI
	•	Legacy
	Be sure the server supports UEFI before configuring the boot mode.
Assign a Network Name	1 Click Unassigned in the Network Name field, and then click the pull-down
		arrow.
	2 Click Select a network... or Multiple Networks to find and select a network
		for this connection.
	You can also select multiple networks. See "Multiple network connections for
	a server port (on page 199)."
Change the port speed setting	Click the pull-down arrow in the Port Speed Setting column, and then select
	Preferred, Auto, or Custom. If Custom is selected, set the port speed, and then
	click OK.
Enable or disable PXE, or use the	Click the pull-down arrow in the PXE column and select Enabled, Disabled, or
Use BIOS setting	Use BIOS.
	If the boot mode is set to UEFI, the Enabled option allows the PXE boot order
	to be specified:
	•	Auto
	•	IPv4Only
	•	IPv6Only
	•	IPv4ThenIPv6
	•	IPv6ThenIPv4
Select a multicast filter or filter set	Click the pull-down arrow in the Multicast Filter column and select a multicast
	filter or filter set.
Delete an Ethernet connection	Click the Delete link in the Action column, or click the connection to select it,
	right-click to display a menu, and then click Delete. The first two connections
	cannot be deleted.
Add an Ethernet connection	Click Add at the bottom of the Ethernet Adapter Connections table, or
	right-click in the table, and then select Add.
Delete an iSCSI connection	Click the Delete link in the Action column, or click the connection to select it,
	right-click to display a menu, and then click Delete.
Add an iSCSI connection	Click Add at the bottom of the iSCSI HBA Connections table, or right-click in
	the table, and then select Add.
Delete an FC SAN connection	Click the Delete link in the Action column, or click the connection to select it,
	right-click to display a menu, and then click Delete.
Add an FC SAN connection	Click Add at the bottom of the FC HBA Connections table, or right-click in the
	table, and then select Add.
Delete an FCoE connection	Click the Delete link in the Action column, or click the connection to select it,
	right-click to display a menu, and then click Delete.
Add an FCoE connection	Click Add at the bottom of the FCoE HBA Connections table, or right-click in
	the table, and then select Add.
Enable or disable iSCSI boot or	Click the pull-down arrow in the Boot Settings column and select Primary,
offload	Secondary, USE-BIOS, or Disabled.
View or modify iSCSI boot	To modify, click on the Edit icon next to the ‘primary’ or ‘secondary’ boot
configuration	setting.
Change the SAN fabric	Click the pull-down arrow in the FC SAN name box.
connection
		Virtual Connect server profiles 212