HP Virtual Connect Firmware Edit Ethernet Network screen

Task	Action
network
Change the uplink interface port speed	Click the pull-down box under Speed/Duplex, and then select a setting.
or disable the port
Delete an added port	Click the Delete link in the Action column, or left-click to select the line
	item, right-click to display a pull-down menu, and then select Delete.
Add this network to Network Access	In the Network Access Groups field, begin typing the name of a Network
Groups	Access Group that should include this network. When the Network
	Access Group name appears, select the name.
Remove this network from Network	In the Network Access Groups field, click the X next to the Network
Access Groups	Access Group name that should not be included.
Save changes	Click Apply.
Cancel without saving changes	Click Cancel.

Edit Ethernet Network screen

To access this screen, do one of the following:

•Click the Edit link for a network on the Ethernet Networks (External Connections) screen (on page 126).

•Click a network on the Interconnect Bay Summary screen ("Ethernet Bay Summary (General Information) screen" on page 240).

•Enter a network name in the Find Configuration Items search field in the left navigation tree, and then select the network.

Use this screen to edit the properties of an existing network or to delete a network.

This screen has similar fields to the Define Ethernet Network screen (on page 120). This screen can only be edited by users with network role permissions, but it is viewable by all authorized users.

The following table describes the fields within the Edit Ethernet Network screen.

Virtual Connect networks 122