HP Virtual Connect Firmware manual 185

Column name	Description
MAC	Type of MAC address assignment configured for the Virtual Connect domain
Action	Perform delete operations
iSCSI HBA Connections
Port	Relative order of the port on the server receiving the profile
Network Name	Unassigned or name of the network associated with this port
Status	Displays the current linked status of the selected port
Port Speed Type	The requested operational speed for the server port. Valid values include
	"Auto", "Preferred", "Custom", and "Disabled". The default value is
	"Preferred".
	Auto—The maximum port speed is determined by the maximum configured
	speed for the network.
	Preferred—The speed of the network is the same as the preferred speed of the
	network to which the connection is associated. If no preferred speed is
	configured for a network, it behaves like "Auto".
	Custom—You can configure any speed from 100Mb to the maximum
	configured speed for the network in 100-Mb increments.*
	For all speed types, the maximum port speed is determined by the maximum
	configured speed for the network. If the speed type is "Auto," VCM
	determines the appropriate port speed based on the available bandwidth for
	the port. The configured port speed behaves like Auto (default). If the speed
	type is "Disabled," bandwidth is not allocated. You can only set the minimum
	port speed here. The maximum is set in the port link speed.
Boot Setting	Enables or disables offload or boot on the network connection. Valid values
	are DISABLED, PRIMARY, (SECONDARY), and USE-BIOS. For more
	information, see "Creating iSCSI connections (on page 192)." After selecting
	an option, you must click outside the grid to complete the selection.
MAC	Type of MAC address assignment configured for the Virtual Connect domain
Action	Perform delete operations
FC HBA Connections
Port	Relative order of the Fibre Channel port on the server receiving the profile
Connected to	Bay number of the VC-FC module to which the port is connected
FC SAN Name	Name of the SAN fabric to which the port is connected, or Unassigned
Status	Status of the Fibre Channel module port connected to the server HBA port
Port Speed Type	Speed of the VC-FC module port connected to the server HBA port. Can be set
	to "1", "2", "4", "8", "Auto", or "Disabled".
	Auto—VCM determines the appropriate port speed based on the available
	bandwidth for the port.
	Disabled—The connection is disabled and no bandwidth is allocated.
	1,2,4, and 8Gb—Predefined custom port speed selection that can be used for
	the connection
	For the HP Virtual Connect 4Gb FC Module, supported speed values include
	"Auto","1Gb","2Gb", "4Gb", and "Disabled". If the value is set to 8Gb, the
	speed is auto-negotiated by Virtual Connect.*
WWPN	Type of WWN address assignment configured for the Virtual Connect
	domain
Action	Perform delete operations
FCoE HBA Connections
Port	Relative order of the port on the server receiving the profile
Connected to	Bay number of the FlexFabric module to which the port is connected

Virtual Connect server profiles 185