HP Virtual Connect Firmware Column, Column, Column, Description, Description, Description, To refresh FIP snooping data, click Refresh

Column	Description
Connected To	Displays the system name or management IP address of the FCoE-capable
	switch that this uplink port is connected to on the other end. The remote
	device must support LLDP to display this information.
FCF Name	FCF switch node WWN name associated with the FCoE VLAN. The name
	is provided by the FCF in snooped FIP messages.
Fabric Name	The fabric name associated with the FCoE VLAN. It is provided by the FCF
	in snooped FIP messages.

The following table describes the columns within the Uplink Port FCF MAC Addresses table.

Column	Description
LAG ID	Identifies the group of ports that have been aggregated together to form
	an 802.3ad Link Aggregation Group. This ID is unique only within a
	single VC-Enet module, meaning the same LAG ID can be used on
	different VC-Enet modules, but it is only meaningful for ports within the
	same VC-Enet module.
VLAN ID	The VLAN ID associated with the list of FCF MAC Addresses
FCF MAC Address	In FCF mode, typically a single FCF MAC address is advertised per
	switch. In NPV mode, typically each port on the FCF switch that is part of
	the LAG advertises its own FCF MAC address.

The following table describes the columns within the Downlink Port Sessions table.

Column	Description
Port	The server downlink port corresponding to the FCoE connection
	associated with the FCoE network
MAC Address	MAC address of the server downlink port corresponding to the FCoE
	connection
LAG ID	LAG ID for the uplink ports providing FCoE connectivity for this server
	downlink port
VLAN ID	VLAN ID associated with the FCoE network assigned to the server
	downlink port
Network	Network name associated with the FCoE network
Profile	Descriptive name for the server profile that associates server downlink
	port, FCoE connection and FCoE network
FCF MAC Address	In FCF mode, typically a single FCF MAC address is advertised per
	switch. In NPV mode, typically each port on the FCF switch that is part of
	the LAG advertises its own FCF MAC address.
FCoE MAC Address	Fabric Provided MAC Address (FPMA). This MAC address is used by the
	server CNA to log into the SAN Fabric represented by the FCoE network.
	The FCoE MAC is constructed from FC-MAP and FC_ID, both provided by
	the FCF.
FC ID	The FC_ID is a 24 bit field assigned by the Fabric services on the FCF to
	each initiator and used to route frames through the FC network.
FCF Name	FCF switch node WWN name associated with the FCoE network. The
	name in snooped FIP messages is provided by the FCF.

To refresh FIP snooping data, click Refresh.

Virtual Connect modules 248