Task

Action

 

 

Add an SNMP trap destination

Click Add below the destination table, or right-click on the header row of

("Adding an SNMP trap

the destination table, and then select Add Destination.

destination" on page 39)

 

Edit an SNMP trap destination

Click Edit in the Action column, or right-click on the trap destination row,

 

and then select Edit Destination.

Delete an SNMP trap destination Click Delete in the Action column, or right-click on the trap destination row, and then select Delete Destination.

Save changes

Click Apply.

SNMP Configuration (VC-FC)

By enabling SNMP for VC-FC modules, network management systems can monitor the VC-FC modules in the domain for events, such as warnings and errors, which might require corrective actions. You must have storage or domain role permission to administer FC SNMP settings.

The VC-FC SNMP settings apply to all VC-FC modules in the VC domain.

The following table describes the fields within the SNMP Configuration screen.

Field name

Description

 

 

Enable SNMP

Select to enable SNMP.

 

 

Enable SMI-S

Select to enable SMI-S.

System Contact

Specify a contact name for this system when SNMP is enabled. The maximum

 

length is 20 characters.

Read Community

Controls SNMP read access when SNMP is enabled. The default value is "public".

 

The read community string must always be set when SNMP is enabled. The

 

maximum length is 24 characters.

 

 

SNMP Access

Table of networks that are allowed SNMP access

Virtual Connect domains 35