HP Virtual Connect Firmware Define Shared Uplink Set screen, Task, Action, Field name, Description, Observe the following information:

This summary screen displays the mapping of networks to external shared uplink connections. This screen is only applicable if multiple networks identified by VLAN tags are being connected over a single external uplink set.

The following table describes the fields within the Shared Uplink Sets (Associated Networks) screen.

Field name	Description
Uplink Set	Name of the shared uplink set
Network Status	Status of the network
Shared Network Name	Name of the associated network
Type	Displays whether the associated network is FCoE or ENET
VLAN ID	Displays the VLAN ID number
Smart Link	Displays whether Smart Link is enabled or disabled
Private Network	Displays whether the network is designated or not designated as a private
	network.
Action	Go to network or shared uplink set

The following table describes the available actions in the Shared Uplink Sets (Associated Networks) screen.

Task	Action
Edit a network	Click Go to Network in the Action column, or right-click the network, and
	then select Go to Network.
Edit a shared uplink set	Click Go to Shared Uplink Set in the Action column, or right-click the
	shared uplink set, and then select Go to Shared Uplink Set.
Add a shared uplink set	Click Add below the table, or right-click on the header row to display a
	menu, and then select Add SUS.

Define Shared Uplink Set screen

To access this screen, click the Shared Uplink Sets link in the left navigation tree, and then click Define Uplink Set, or select Define Uplink Set from the Define pull-down menu.

Observe the following information:

Virtual Connect networks 134