HP Virtual Connect Firmware VC Module MIB traps, Trap name, Trap data, Description, •NORMAL—Thecomponent is fully functional, •WARNING—Thecomponent has a potential problem

•WARNING—The component has a potential problem.

•INFO—Operational information on the fully functioning component.

•UNKNOWN—VC Manager has not yet established communication with the component.

•NORMAL—The component is fully functional.

Trap severities are only supported for VC-Enet or VCM traps.

VC Module MIB traps

The following table lists traps in the VC Module MIB.

Trap name	Trap data	Description
vcModRoleChange	moduleRole	The VCM role of the module has changed.
vcModInputUtilizationUp	port identification	The input line utilization on a port has exceeded its
		high-water mark for longer than 30 seconds. port is the
		index of the affected port in ifTable.
vcModInputUtilizationDown	port identification	The input line utilization on a port has dropped below its
		low-water mark for longer than 30 seconds. port is the
		index of the affected port in ifTable.
vcModOutputUtilizationUp	port identification	The output line utilization on a port has exceeded its
		high-water mark for longer than 30 seconds. port is the
		index of the affected port in ifTable.
vcModOutputUtilizationDown	port identification	The output line utilization on a port has dropped below its
		low-water mark for longer than 30 seconds. port is the
		index of the affected port in ifTable.
vcModInputErrorsUp	port identification	The input error count on a port has exceeded its
	ifInErrors	high-water mark for longer than the error averaging
		period. port is the index of the affected port in
		ifTable.
vcModInputErrorsDown	port identification	The input error count on a port has dropped below its
	ifInErrors	low-water mark for longer than the error averaging
		period. port is the index of the affected port in
		ifTable.
vcModOutputErrorsUp	port identification	The output error count on a port has exceeded its
	ifOutErrors	high-water mark for longer than the threshold averaging
		period. port is the index of the affected port in
		ifTable.
vcModOutputErrorsDown	port identification	The output error count on a port has dropped below its
	ifOutErrors	low-water mark for longer than 30 seconds. port is the
		index of the affected port in ifTable.
vcModPortBpduLoopDetected	port identification	A network loop condition is detected on this port. If the
	loop status	loop condition is detected on a Flex10 port, the trap data
		indicates the physical port associated with the Flex10
		port.
		If multiple Flex10 ports on a physical port detect a loop
		condition, a separate trap is sent for each occurrence of
		the loop condition.

Virtual Connect domains 43