HP Virtual Connect Firmware manual 210

Column name	Description
	MAC addresses, the VC-defined MAC address appears. If the profile is using
	hardware MAC addresses, FACTORY-DEFAULT appears.
Mapping	Server hardware mapping assignment. See "iSCSI and FCoE port
	assignments (on page 173)."
Action	Delete a connection. Connections can be removed starting with the last
	connection in the list.
FC HBA Connections
Port	Relative order of the Fibre Channel port on the server receiving the profile
Connected to	Bay number of the VC-FC module to which the port is connected
FC SAN Name	Name of the SAN fabric to which the port is connected, or Unassigned
Status	Status of the Fibre Channel module
Port Speed Type	Speed of the VC-FC module port connected to the server HBA port. Can be set
	to "1", "2", "4", "8", "Auto", or "Disabled".
	Auto—VCM determines the appropriate port speed based on the available
	bandwidth for the port.
	Disabled—The connection is disabled and no bandwidth is allocated.
	1,2,4, and 8Gb—Predefined custom port speed selection that can be used for
	the connection.
	For the HP Virtual Connect 4Gb FC Module, supported speed values include
	"Auto","1Gb","2Gb", "4Gb", and "Disabled". If the value is set to 8Gb, the
	speed is auto-negotiated by Virtual Connect.*
WWPN	As of VC 3.70, the actual hardware WWN for mapped connections
	appears. For unmapped connections, FACTORY-DEFAULT continues to
	appear. If the profile is assigned, the WWN assigned to the port appears. If
	the profile is unassigned and the domain is set to show factory default
	WWNs, FACTORY-DEFAULT appears. If the profile is using VC-defined
	WWNs, the VC-defined WWN appears. If the profile is using hardware
	WWNs, FACTORY-DEFAULT appears.
Mapping	Server hardware mapping assignment
Action	Delete a connection. Connections can be removed starting with the last
	connection in the list.
FCoE HBA Connections
Port	Relative order of the FCoE port on the server receiving the profile
Connected to	Bay number of the VC module to which the port is connected
FC SAN/FCoE Network Name	Name of the SAN fabric or FCoE network to which the port is connected, or
	Unassigned
Type	Type of connection, SAN or FCoE depending on the fabric or FCoE selection
Status	Status of the VC module
Port Speed Type	Requested speed for the FlexFabric connection.
	If an FCoE network is assigned to the connection, the supported port speed
	types are "Auto", "Preferred", "Custom" and "Disabled".
	If a SAN Fabric is assigned to the connection, the supported port speed types
	are "1", "2", "4", "8", "Preferred", "Custom" and "Disabled".
	For all port speed types, if configured, the maximum allocated port speed is
	determined by the maximum connection speed for that SAN Fabric or FCoE
	network.
	Auto—VCM determines the appropriate port speed based on the available
	bandwidth for the port.
	Preferred—Use the preferred speed of the SAN Fabric or FCoE network
	selected for this connection. If no preferred speed is configured, VCM
	Virtual Connect server profiles 210